 
To enlarge please click
on the thumbnail. |
W. Mueller 10 cavity Head |
| Ident.-no: | MUELLER-10fach |
| status: | new |
| Application: | multible bottles |
| Machine type: | S10/35-80 P-PE, TK, 1-K. |
| Price: | 50.000,00 EUR |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
BFKS 25 with PWDS |
| Ident.-no: | BFKS 25 mit PWDS |
| status: | rebuilt |
| Application: | 220L L-Ring drums |
| Machine type: | |
| Price: | 130.000,00 EUR |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
Dreher Mill with Conveyer |
| Ident.-no: | |
| status: | second-hand |
| Application: | |
| Machine type: | |
| Price: | 20.000,00 EUR |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
W. Müller Die Head S3/90-170 T-PE, RK, 1 Kanal, |
| Ident.-no: | 39001444 |
| status: | new |
| Application: | small can with view stripe |
| Machine type: | KEB 20 |
| Price: | 42.500,00 EUR |
Request for this article
|
To enlarge please click
on the thumbnail. |
VK1-1 |
| Ident.-no: | Blasformanlage |
| status: | second-hand |
| Application: | for spare parts only |
| Machine type: | |
| Price: | 18.500,00 EUR |
| Description: | Blowmoulding machine
year of construction 1986
Extruder 60/20PE/PVC
1x head S2/35-85 TPE
1x head S1/35T-PVC |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
Raw Material supply |
| Ident.-no: | Piovan |
| status: | new |
| Application: | |
| Machine type: | |
| Price: | 27.100,00 EUR |
| Description: | incl. control cabinet and accessories
Model MDW250/40
year of construction 2008
voltage: 230V 50-60Hz
activity 1KW
weight 200kg
capacity: 12dm³
hopper Model: C30l |
Request for this article
|
To enlarge please click
on the thumbnail. |
Conveyer |
| Ident.-no: | Broich |
| status: | new |
| Application: | |
| Machine type: | |
| Price: | 6.000,00 EUR |
| Description: | Typ: GF8
length: 4000mm
width 1000mm
year of construction 05/2008 |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
Blow mould with Mask |
| Ident.-no: | Form |
| status: | new |
| Application: | 10 l. articel |
| Machine type: | |
| Price: | 70.000,00 EUR |
| Description: | blow moulding |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
Post cooling device |
| Ident.-no: | Matheus |
| status: | new |
| Application: | |
| Machine type: | |
| Price: | 83.900,00 EUR |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
Compressor |
| Ident.-no: | Atlas Copco |
| status: | new |
| Application: | |
| Machine type: | |
| Price: | 17.000,00 EUR |
| Description: | Typ: GA18
year of construction 2008
P max: 9,8bar
Qv: 43,5 l/s
P motor: 18.5KW - 25hp
n motor: 2940 1/min |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
Cooling Aggregate |
| Ident.-no: | Euro Chiller |
| status: | new |
| Application: | |
| Machine type: | |
| Price: | 32.800,00 EUR |
| Description: | cooling capacity 128KW
Year of construction 2008
|
Request for this article
|
 
To enlarge please click
on the thumbnail. |
Cutting Mill with Conveyer |
| Ident.-no: | Rapid |
| status: | new |
| Application: | up to 5L jerry can |
| Machine type: | |
| Price: | 33.800,00 EUR |
| Description: | mill:
Typ: G300-30KUB
year of construction: 2008
supply voltage: 400V 3ph. 50Hz
conveyer:
manufacturer: BOFAB
Typ R 3200 x 300
speed: 6m/min
conveyer with metal detector |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
|
| Ident.-no: | Hema |
| status: | new |
| Application: | |
| Machine type: | |
| Price: | 5.000,00 EUR |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
welding device |
| Ident.-no: | Bielomatik |
| status: | new |
| Application: | |
| Machine type: | |
| Price: | 80.000,00 EUR |
| Description: | year of construction 2008
frequency 50Hz
rated voltage 400V
power equipment 5,542KVA |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
Extruder E 90/25D PE |
| Ident.-no: | Extruder E 90/25D PE |
| status: | new |
| Application: | |
| Machine type: | |
| Price: | 126.000,00 EUR |
| Description: | Extruder barrel and feed zone nitride hardened.
Feed zone with water-cooled grooved bush.
Screw for PE nitride hardened.
Ceramic heaters with blower cooling.
Drive via spur gear with integrated thrust bearing and V-belt drive.
Clamping collar for flanging the head to the extruder.
Material hopper with sight glass for the control of the filling level and hopper discharge with stop valve.
Screw diameter 90 mm
Effective screw length 25 D
Drive wattage DC motor 68 kW
Heating zones for extruder 3
Heating zones for reducer
and clamping collar 1
Mains voltage 380 - 480 V
Plasticizing capacity (max.)
HDPE 220 kg/h
HMWPE 200 kg/h
depending on material, screw, parison die head and die gap, but based on a mixture of approx. 70% virgin material and approx. 30% regrind.
Installation altitude above 1.000 m sea level, the plasticizing capacity is reduced.
price:126.000,-€ (special price) |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
accu head 5L / 200 |
| Ident.-no: | Akkukopf 5L / 200 |
| status: | rebuilt |
| Application: | |
| Machine type: | |
| Price: | 50.000,00 EUR |
| Description: | Overhauled with 2 year warranty
Not suitable for PWDS
suitable for RWDS
Fifo design with overlapping heart shaped curves. Hydraulic control cylinder for wall thickness control. Adapter prepared for melt pressure and melt temperature sensors. Heating with ceramic heater bands as standard. Coated melt-conducting surfaces.
Support with adjusting screws.
Max. filling weight for HDPE 4,16 kg
Min. die diameter 65 mm
Max. die diameter 200 mm
Number of heating zones 4
Weight approx. 1200 kg
Without die tools
Required equipment in addition to the basic equipment of the blow molding machine:
4 heat zones |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
Akku LC-R127R2PG |
| Ident.-no: | 88260201 |
| status: | new |
| Application: | USV |
| Machine type: | |
| Price: | 24,00 EUR |
| Description: | TYP LC-R127R2PG:
System: PB Blei Akku
voltage: 12,0 Volt
Rated capacity: 7,2Ah (7.200mAh)
connection: 4,8mm metal plug
VdS-Nr.: G193046
Dimensions(LxWxH): 151x64.5x94mm
approx. mass: 2,47 kg |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
CLOSING DEVICE KEB2/11 |
| Ident.-no: | 88058788 |
| status: | new |
| Application: | |
| Machine type: | KEB2/11 |
| Price: | 5.000,00 EUR |
| Description: | closing force approx 60 KN
Max. mould size
wide 280mm
height 400mm
thick 2x 100mm |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
CLOSING DEVICE left |
| Ident.-no: | 88121646 |
| status: | new |
| Application: | |
| Machine type: | KEB4-2.01 |
| Price: | 5.000,00 EUR |
| Description: | closing force approx 100 KN
Max. mould size
wide 370mm
height 470mm
thick 2x 130mm |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
CLOSING DEVICE KEB4-2.01 right |
| Ident.-no: | 88121645 |
| status: | new |
| Application: | |
| Machine type: | KEB 4-2.01 |
| Price: | 5.000,00 EUR |
| Description: | closing force approx 100 KN
Max. mould size
wide 370mm
height 470mm
thick 2x 130mm |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
CLOSING DEVICE KEB6/11 |
| Ident.-no: | 88161349 |
| status: | new |
| Application: | |
| Machine type: | KEB6/11 |
| Price: | 22.700,00 EUR |
| Description: | clamping force approx 100 KN
Max. mould size
wide 435mm
height 470mm
thick 2x 130mm |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
CLOSING DEVICE KEB4-2.02 |
| Ident.-no: | 88121686 |
| status: | new |
| Application: | |
| Machine type: | KEB4-2.02 |
| Price: | 8.450,00 EUR |
| Description: | closing force approx 100 KN
Max. mould size
wide 370mm
height 470mm
thick 2x 130mm |
Request for this article
|
 
To enlarge please click
on the thumbnail. |
CLOSING DEVICE |
| Ident.-no: | 88146774 |
| status: | new |
| Application: | |
| Machine type: | KEB2 / KEB3 |
| Price: | 28.000,00 EUR |
| Description: | min. mould wide 200mm
max. open range 400mm
|
Request for this article
|
 
To enlarge please click
on the thumbnail. |
CLOSING DEVICE |
| Ident.-no: | 88148373 |
| status: | rebuilt |
| Application: | Pneumatic closing device |
| Machine type: | KEB 4/13 |
| Price: | 20.000,00 EUR |
| Description: | max. mould wide 370mm
minimum open range 259
max. open range 479mm
|
Request for this article
|
