KBS blow molding machines - nothing is beyond us!
The all-rounder with limitless possibilities! Whether you wish to produce fuel tanks, canoes in different sizes, complex seat shells, table tops or parts for garden sheds, the extremely durable KBS range of models will win you over with high output rates and it can be adapted to your individual requirements on a modular basis. Many decades of continuous improvement and numerous successful projects speak for themselves.
All KBS blow molding machines are available as single or double-station machines and they can be equipped with a comprehensive post-processing system, shuttle operation or the long-proven robot parison transfer, depending on your requirements.
|Width (max. mm)||1.200||700||600||1.300|
|Length (max. mm)||1.600||1.200||800||1.800|
|Thickness (mm)||2x 400||2x 300||2x 300||2x 500|
|Mold weigth (max. kg)||2x 2.500||2x 1.000||2x 1.000||2x 4.000|
|Clamping stroke (max. mm)||800||800||600||1.700|
|Clamping force (kN)||800/1.000/1.200||400/600||300/400||1.200/1.500|
Reasons for Kautex
The highest possible degree of flexibility thanks to optional shuttle operation or robot parison transfer
Quick tool change
Maximum configurability with PWDS/SFDR, RWDS, WDS and flying knives for flat parts
Lots of possibilities for material and energy savings
The interest in large, shallow plastic components has grown world-wide. Kautex Maschinenbau has recognized this market demand and developed a process that has attracted attention because of its cost-effective manufacturing and levels of quality that are unprecedented in this segment.
Trainee pilots practice on flight simulators before they are allowed to take control of a real aircraft. And now there is a similar simulator for blow molding machines from Kautex Maschinenbau.
The Augmented Service enables Kautex service technicians to perform direct virtual observation for problem analysis and problem solving.
Kautex foam technology “K-Foam” brings substantial savings on material useage and an improved carbon footprint in the production of blow-molded products. All Kautex Maschinenbau machines can be equipped or retrofitted with this system.
The technological expertise of Kautex has convinced us. In the machinery sector for the production of blowmolded fuel tanks, there are only very few companys with the innovative potential of Kautex.
Dr. Serge Dupont
Industrial Director Division, Capacity Equipment,
Plastic Omnium Clean Energy Systems
All contacts quick and easy
We are here for you.
Instant help, around the clock!